|
Proximate Analysis, Minerals and Calories
(click here for Midwest Lab
report )
The table
below indicates the values for test results from Midwest Labs, plus
calculated values for components in a formula mixed at a ratio of 1:2 with
water using WildAgain's nutrition calculator. The Kcals are calculated using
both the standard Atwater calculation as well as the modified Atwater as
prescribed by AAFCO.
|
Component (dry powder) |
(Midwest Lab Report)
 |
Rehydrated @ 1:2 water |
Calculated |
|
Moisture % |
4.32 |
Solids % |
17.0 |
|
Protein % |
36.1 |
Protein % |
6.4 |
|
Acid Hydrolysis Fat % |
40.9 |
Fat % |
7.3 |
|
Carbs (subtraction) % |
12.5 |
Carbs % |
2.2 |
|
Calcium % |
1.80 |
Calcium % |
.3 |
|
Phosphorus % |
1.12 |
Phosphorus % |
.2 |
|
Magnesium % |
.093 |
Ca/P Ratio |
1.61 |
|
Sodium % |
.36 |
Kcals/cc
(Atwater) |
1.00 |
|
Potassium % |
.61 |
Kcals/cc
(AAFCO) |
.92 |
|
Peroxide Value
(what's this?) |
< 2 |
|
|
|
Ave. dry wt grams (1 TBSP) |
6.4 |
|
|
|
Kcals/gram
(Atwater) |
5.63 |
|
|
|
Kcals/gram
(AAFCO) |
5.18 |
|
|
|
Cells shaded in light
blue indicate values from tests performed by
Midwest Labs, Omaha, NE.
|
Ingredients
(what's this?)
The table
below indicates the primary ingredients for the lot number indicated.
|
Primary ingredients |
Vegetable Oils, Dried Milk Protein, Dried Hydrolyzed
Casein, Dried Skimmed Milk, Dried Corn Syrup Solids |
|
Secondary ingredients |
Dicalcium Phosphate,
Calcium Carbonate, Potassium Chloride, Magnesium Sulfate,
D,L,Methionine, L-Arginine Sodium Chloride, Choline Chloride, Vitamin
E Supplement, Vitamin A Supplement, Vitamin D-3 Supplement, Zinc
Sulfate, Ferrous Sulfate, Riboflavin Supplement, Manganese Sulfate,
Copper Sulfate, Vitamin B-12 Supplement, Thiamine Hydrochloride,
Pyridoxine Hydrochloride, Folic Acid, Glycine, L-Lysine, L-Threonine,
Taurine,L-Tyrosine, Calcium Iodate, Biotin. |
Solubility Test
(what's this?)
Solubility tests were not performed for
this lot. Please review results for other FoxValley® 32/40 lots.
Physical
characteristics The texture of this product was even and
consistent. This resulted in very low measurement error described below. (The
expected error shown below is equal to 1 standard deviation (statistically
68% of all measurements should fall within this range)).
|
Texture |
Weight/TBSP and measurement
variability |
|
Photo not available for this lot.
See lot #10249 as this
product appears to be very consistent between lots. |
Weight (average) |
6.4 grams /
TBSP (large end of red scoop). |
|
Texture and handling comments |
Smooth and
very fine in texture,
scoops evenly and consistently. |
|
Observed measurement variability
(what's this?) |
Scooping
error generally within +/- 1.3%. Low error
-3.1%; High error +1.6%. |
|
Scoop or weigh? |
Scooping this
product will likely result in an accurate volume, but weighing will
produce a more accurate measurement. |
Other comments
on this product or lot
|